DG RUB SP-W

Step-by-step Demonstration – Application on T-shirt


SCENARIO 1: Graphics with fine details

1. Create Your Own Design Use your graphics software to create your own design.
2. Print the Image Print out your design onto DG RUB SP-W film by solvent/eco solvent printers.
3. Laminate Fine Cut Film Laminate fine cut film onto the printed graphic by laminator.
*Ensure fine details area to be cut exquisitely.
4. Cut the graphic Cut out the printed graphic by cutting plotter.
PLOTTER SETTING
Speed: 10 – 30
Press: 40 – 50
Offset: 0.3
5. Weed Weed away unwanted parts.
6. Laminate Heat Press Film Laminate heat press film onto the printed graphics by laminator.
7. Preheat the Garment (Optional) Press garment for 3-5 seconds to remove moisture and chemical treatment from transfer area.
8. Position on Garmen Peel off back film (adhesive paper) from DG RUB SP-W film.
After preheating garment, position the printed graphic onto garment.
9. Heat Transfer Apply heat evenly onto the printed graphic through heat press film.
HEAT PRESS SETTING
Temperature: 150°C
Pressure: 500g/sqm
Time: 10 – 15 seconds
10. Remove the Film Remove heat press film from clothes after the transferred graphic has enough cooling down.
*Cutting film will be lifted up together with heat press film.

SCENARIO 2: Regular graphics

1. Create Your Own Design Use your graphics software to create your own design.
2. Print the Image Print out your design onto DG RUB SP-W film by solvent/eco solvent printers.
3. Cut the graphic Cut out the printed graphic by cutting plotter.
PLOTTER SETTING
Speed: 10 – 30
Press: 40 – 50
Offset: 0.3
4. Weed Weed away unwanted parts.
5. Laminate Heat Press Film Laminate heat press film onto the printed graphics by laminator.
6. Preheat the Garment (Optional) Press garment for 3-5 seconds to remove moisture and chemical treatment from transfer area.
7. Position on Garmen Peel off back film (adhesive paper) from DG RUB SP-W film.
After preheating garment, position the printed graphic onto garment.
8. Heat Transfer Apply heat evenly onto the printed graphic through heat press film.
HEAT PRESS SETTING
Temperature: 150°C
Pressure: 500g/sqm
Time: 10 – 15 seconds
9. Remove the film Remove heat press film from clothes after the transferred graphic has enough cooling down.
*Cutting film will be lifted up together with heat press film.